Cookie Information

This website uses cookies for reasons of functionality, comfort, and statistics. You can change those settings at any time in the footer on "Privacy Settings". Our Privacy Policy
See less

Stylish and practical kitchen wall organiser

Share on Pinterest Share via email Print
A picture of a wall organiser with a shelf on a red ktichen wall
Get organised with our all-in-one wall organiser
  • Difficulty
    medium
  • Costs
    50-100 £
  • Duration
    1-3 h

Introduction

Get organised with our stylish wall organiser for the kitchen. It even has a space to grow fresh herbs.

What you need

Icon my-product
Tools
Icon accessories
Additional items
  • paintbrush
Icon confirmation
Material list
  • MDF board 60X90cm
  • Beech glued laminated timber 60X18cm
  • Cork panel 60X30cm
  • Black chalkboard paint
  • Hooks with matching screws
  • Wooden dowels
  • Wood screws
  • Wall plugs with matching screws
  • Flowerpot for herbs
L: Length, W: Width, H: Height, D: Diameter

Let's start - step by step

1 5

Getting started

A picture of all the materials needed to create a wall organiser
Here's everything you need
A picture of someone marking out drill holes on pieces of wood
Mark out the drill holes

What you need: Pencil, tape measure, MDF board, Glued laminated timber

Cut the MDF board and glued laminate timber to size, we suggest getting this done at your local DIY store. Next mark on the MDF board where you want to fit the shelf, make sure to leave enough space to write your weekly shopping list. Then mark three drill holes on the marked line – two of which are 5cm from the edge and one in the middle. Then make two more marks at the mid point between each of the marked drill holes for the wooden dowels. You will transfer these marks afterwards onto the glued laminated timber.

2 5

Drilling the holes

A picture of someone drilling holes into MDF board using a cordless green hammer drill
Now drill holes for the wooden dowels

What you need: hammer drill

Now drill the holes for the two wooden dowels on the MDF board and the glued laminated timber using a cordless hammer drill. Choose a drill bit 1-2mm smaller than the dowel size. Make sure not to drill through the board so that the dowel sits right.

3 5

Painting the wall board

A picture of someone apply chalkboard paint to a wooden board
Apply chalkboard paint to the wall board

What you need: paintbrush, chalkboard paint

Next using a matching holesaw attachement, saw the hole for a herb plant pot into the board that will form the shelf. Then before you attach the shelf to the wall board, apply chalkboard paint to the wall board and leave it to dry.

4 5

Fitting the shelf

A picture of someone adding wood glue to the pre-drilled holes
Attach the shelf to the wall board

Insert the wooden dowels with a bit of glue into the pre-drilled holes in the shelf, also apply wood glue to the edge and then insert everything into the matching dowel holes on the wall board. Afterwards, fix the shelf from the back side of the wall board using three wood screws. You can get your bearings for this using the small drill holes made in step 1. Then in the lower part of the wall board screw in three wall hooks so you can hang shoppig bags and aprons for example.

5 5

Fixing the cork surface

A picture of someone using a hot glue gun to attach the corkboard to the wall board
Just add the finishing touches

Now using a hot glue gun attach the cork surface for the pinboard onto the wall board. Then fit the finished wall organiser onto the wall using wall plugs and screws. Your kitchen organiser is now complete.


Legal notice

Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.