Costs< 50 €
Want to keep track of what’s growing in your garden bed? In that case, small garden signs are the most practical solution for knowing what’s growing and what’s yet to grow – especially if you have sown various different plants and herbs. Made from wood and painted in bright colours, these little sign posts aren’t just handy – they’re also weatherproof head-turners. We’ll show you how to build your own signs with zero fuss.
It should go without saying that your safety is paramount throughout every step of the project, so make sure you take the necessary precautions to protect yourself. You can find an overview of the correct protective clothing you need when using each type of tool .
What you need
- glass tumbler
- face mask
- protective goggles
- Protective gloves
- Ear plugs
- Paint roller
- Pocket rule
- Water-resistant wood paint
- Wooden plank made from oak with a thickness of 18 mm (the size is up to you, depending on how many signs you want to make)
- Round metal rod, 6 mm thick, length of your choice
Let's start - step by step
Draw out the shape
What you need: Pocket rule, Pencil, glass tumbler
Your colourful garden signs can of course be different sizes – whatever suits your taste. Here, we’ll show you step-by-step how to build a square sign measuring 120 x 120 mm.
Start by marking out the corresponding measurements on a wooden plank. You can use a glass tumbler to do the corners.
Saw out the shape and sand it
Now, clamp the plank securely to your work surface and saw out the marked shape. Use a jigsaw blade designed for curved cuts for the corners and a strong jigsaw blade for the straight sides.
Then, sand all the sawn edges using a sanding sponge.
Drill a hole for the post
Now, measure out the centre of the bottom side and mark the position for the metal rod. Choose the diameter of your drill bit according to the thickness of your metal rod. This is 6 mm in our case.
Then, securely clamp the sign to your work surface in a vertical position, with the marking facing up, and drill a hole that is around 30 mm deep.
Use a piece of scrap wood to make sure the wooden sign is clamped upright securely.
Paint and decorate
What you need: Dremel VersaTip butane soldering iron, Paint roller, water-resistant wood paint
It’s now time to get creative and give your signs a splash of colour.
You have various different options when it comes to inscribing and decorating your signs. A waterproof marker is a simple option. Pyrography is also a great option here and gives the whole thing a particularly attractive finish.
Finally, insert the rod into the hole and there you have it – the perfect head-turner for your flower bed is finished.
Bosch does not accept any responsibility for the instructions stored here. Bosch would also like to point out that you follow these instructions at your own risk. For your own safety, please take all the necessary precautions.